If your computer has a network adapter that is connected to a local area network, you do not need to manually create a LAN connection, because Windows automatically creates and configures the connection when you start your computer. You need to contact your Internet Service Provider. Create a Local Area Network (LAN) connection: https://technet
1. Setting IP Address Ether 1. Langkah pertama yang dilakukan adalah memasukkan IP Address di ether 1. Tekan menu IP 👉 tekan Address, setelah itu tekan tanda "+". Masukkan IP Addressnya dan Interfacenya 👉 pilih ether 1. Setelah itu tekan Apply dan OK. 2. Setting IP Address Ether 2. Langkah kedua masukkan IP ether 2 dengan cara yang sama After that, select the speed of your Ethernet port from the drop-down menu. Bonus Tip: To check the Ethernet port speed, follow the below-mentioned steps: Step 1: Open Network and Sharing Center in your Windows device. Step 2: Select Change adapter settings option from the navigation pane on the left hand side. Step 3: Next, right-click on your2. Select a network. Click the network to which you want to connect each of your network computers. 3. Click Connect. It's in the lower-right side of the network's name box. 4. Enter the network's password. Type in the network's password when prompted.
To change the default power mode on Windows 11, use these steps: Open Settings. Click on System. Click the Power & battery (or Power) page on the right side. Source: Windows Central (Image creditPertama, silakan pengguna Windows 10 memilih opsi “settingan”. Setelah itu, pilihlah opsi “jaringan dan internet”. Tahapan nomor dua, klik pilihan menu ethernet. Lalu, tekanlah tombol “mengubah pilihan adapter”. Selanjutnya, pemakai Windows 10 harus mengklik kanan di bagian jaringan ethernet.For Wi-Fi connection. Select Start > Settings > Network & internet > Wi-Fi and then select the Wi-Fi network you're connected to. Under Properties, look for your IP address listed next to IPv4 address. Use the Control Panel to Change Network Name in Windows 11. Open Control Panel. Go to Network and Internet > Network Sharing Center. Select Change adapter settings from the left side. Right-click the network name you want to change, and select Rename. Edit the network name and press Enter to save it. Now I'm connected. HTwsrHH.